The ProZone Smart Solar Festoon Lighting system provides flexible off-grid illumination for construction, demolition, infrastructure and temporary working environments where continuous lighting is needed across routes, walkways or distributed site areas.
Unlike a single tower light, festoon lighting spreads illumination across a wider linear area, making it particularly suitable for pedestrian routes, access ways, compounds and locations where consistent low-level lighting is required.
By combining solar generation, battery storage and intelligent controls, the system can operate without permanent mains electricity or continuously running diesel generators.
Some areas of a site do not require the intensity or coverage of a tower light.
Walkways, access routes, temporary compounds and pedestrian areas often benefit more from lighting distributed along the route itself.
Solar festoon lighting provides a practical way to illuminate these areas without installing extensive temporary cabling or relying on generator-powered lighting.
Festoon lighting can provide illumination across longer routes and distributed working areas rather than concentrating light from a single point.
This makes it particularly useful for:
Solar generation and battery storage allow the system to operate independently from mains electricity, helping reduce the amount of temporary electrical infrastructure required on site.
Where festoon lighting replaces generator-powered alternatives, it can help reduce diesel consumption, fuel deliveries and associated operating costs.
Solar-powered lighting does not require a continuously running diesel engine, helping reduce operational noise around site routes and compounds.
Intelligent lighting controls can help manage when and how the lighting operates, reducing unnecessary energy use while ensuring illumination is available when required.
Temporary sites change constantly.
Festoon systems can be positioned to suit current routes and working areas and adjusted as access arrangements or site layouts change.
ProZone Smart Solar Festoon Lighting is suitable for a wide range of temporary and remote environments, including:
Construction projects often include temporary pedestrian routes and access areas that change as work progresses.
Solar festoon lighting can provide consistent illumination along these routes without requiring permanent electrical infrastructure.
This can be particularly useful during early phases of construction when mains power may not yet be available across the full site.
Demolition sites can involve constantly changing access arrangements and restricted zones.
Distributed lighting can help keep temporary walkways, compounds and access routes illuminated as site layouts evolve.
Because the system does not rely on diesel generators, it can also help reduce noise and fuel use alongside wider site-management measures such as dust suppression and environmental monitoring.
Infrastructure and rail projects often require lighting across long temporary access routes, compounds and working zones.
Festoon lighting can provide a practical alternative to installing multiple individual lighting units where continuous route illumination is more appropriate.
Festoon lighting is particularly useful where the requirement is to illuminate a route or series of connected areas rather than a large open working zone.
A solar tower light may be more suitable for broad, high-output illumination, while a compact solar column light may be better for individual access points or smaller localised areas.
ODS can help determine which type of solar lighting is most appropriate for the layout and operational requirements of your site.
The ProZone Smart Solar Festoon Lighting system provides a flexible off-grid solution for temporary routes, walkways, compounds and distributed site areas.
ODS supplies solar-powered lighting solutions for construction, demolition, infrastructure, quarrying and industrial applications.
Contact ODS to discuss whether ProZone Smart Solar Festoon Lighting is suitable for your site.